Micron Technology Pacemaker TX716A User Manual

Explorer 100 Series – TX716A – POCKET TRANSMITTER - Quick User Guide

Modulation Level

Indicator

Mic Level Control

Audio Input Socket

6-pin LEMO

Antenna Socket

(7) Adjust LEVEL gain control, while the performer speaks at

correct level so that AF Peak LED comes on all the time, then

set gain back by two notches at which AF Peak LED flashes

occasionally.

Battery Status Indicator

(5) Check TX battery status LED, if

RED replace battery with a new one

(4) Switch on TX

(by connecting microphone

cable to 6-pin LEMO socket)

(2) Fit a PP3 9V battery, check

RX battery status LED

Please watch polarity of

battery.

The battery compartment is opened

by pressing the button on the back

of the unit. There is a slot for the 9V

battery to fit into.

Setting Up Procedure:

(1) Connect provided TX antenna

(Screw-on SMA antenna)

(3) Set your TX frequency same

as RX

please note: to change

frequency turn unit on/off

The battery can easily be

released with the aid of the

thumb.

Battery Life approx. 6

hours

(6) Check RX ‘Active’ Received Signal

Strength Indicators – a LED should be

GREEN

(8) NOW YOUR SYSTEM IS READY TO USE.